Reference and Manual

Hosting Glossary PHP HTML 4.01 CSS 2.0 Core Javascript 1.5 XHTML 1.0

Configure options

PHP Manual
Prev		Next

Appendix G. Configure options

Table of Contents
List of core configure options

List of core configure options

Below is a partial list of configure options used by the PHP configure scripts when compiling in Unix-like environments. Most configure options are listed in their appropriate locations on the extension reference pages and not here. For a complete up-to-date list of configure options, run ./configure --help in your PHP source directory after running autoconf (see also the Installation chapter). You may also be interested in reading the GNU configure documentation for information on additional configure options such as --prefix=PREFIX.

Note: These are only used at compile time. If you want to alter PHP's runtime configuration, please see the chapter on Runtime Configuration.

Configure Options in PHP 4

Note: These options are only used in PHP 4 as of PHP 4.1.0. Some are available in older versions of PHP 4, some even in PHP 3, some only in PHP 4.1.0. If you want to compile an older version, some options will probably not be available.

Misc options

--enable-debug: Compile with debugging symbols.
--with-layout=TYPE: Sets how installed files will be laid out. Type is one of PHP (default) or GNU.
--with-pear=DIR: Install PEAR in DIR (default PREFIX/lib/php).
--without-pear: Do not install PEAR.
--enable-sigchild: Enable PHP's own SIGCHLD handler.
--disable-rpath: Disable passing additional runtime library search paths.
--enable-libgcc: Enable explicitly linking against libgcc.
--enable-php-streams: Include experimental PHP streams. Do not use unless you are testing the code!
--with-zlib-dir[=DIR]: Define the location of zlib install directory.
--enable-trans-sid: Enable transparent session id propagation. Only valid for PHP 4.1.2 or less. From PHP 4.2.0, trans-sid feature is always compiled.
--with-tsrm-pthreads: Use POSIX threads (default).
--enable-shared[=PKGS]: Build shared libraries [default=yes].
--enable-static[=PKGS]: Build static libraries [default=yes].
--enable-fast-install[=PKGS]: Optimize for fast installation [default=yes].
--with-gnu-ld: Assume the C compiler uses GNU ld [default=no].
--disable-libtool-lock: Avoid locking (might break parallel builds).
--with-pic: Try to use only PIC/non-PIC objects [default=use both].
--enable-memory-limit: Compile with memory limit support.
--disable-url-fopen-wrapper: Disable the URL-aware fopen wrapper that allows accessing files via HTTP or FTP.
--enable-versioning: Export only required symbols. See INSTALL for more information.
--with-imsp[=DIR]: Include IMSp support (DIR is IMSP's include dir and libimsp.a dir). PHP 3 only!
--with-mck[=DIR]: Include Cybercash MCK support. DIR is the cybercash mck build directory, defaults to /usr/src/mck-3.2.0.3-linux for help look in extra/cyberlib. PHP 3 only!
--with-mod-dav=DIR: Include DAV support through Apache's mod_dav, DIR is mod_dav's installation directory (Apache module version only!) PHP 3 only!
--enable-debugger: Compile with remote debugging functions. PHP 3 only!
--enable-versioning: Take advantage of versioning and scoping provided by Solaris 2.x and Linux. PHP 3 only!

PHP options

--enable-maintainer-mode: Enable make rules and dependencies not useful (and sometimes confusing) to the casual installer.
--with-config-file-path=PATH: Sets the path in which to look for php.ini, defaults to PREFIX/lib.
--enable-safe-mode: Enable safe mode by default.
--with-exec-dir[=DIR]: Only allow executables in DIR when in safe mode defaults to /usr/local/php/bin.
--enable-magic-quotes: Enable magic quotes by default.
--disable-short-tags: Disable the short-form <? start tag by default.

SAPI options

The following list contains the available SAPI&s (Server Application Programming Interface) for PHP.

--with-aolserver=DIR: Specify path to the installed AOLserver.
--with-apxs[=FILE]: Build shared Apache module. FILE is the optional pathname to the Apache apxs tool; defaults to apxs. Make sure you specify the version of apxs that is actually installed on your system and NOT the one that is in the apache source tarball.
--with-apache[=DIR]: Build a static Apache module. DIR is the top-level Apache build directory, defaults to /usr/local/apache.
--with-mod_charset: Enable transfer tables for mod_charset (Russian Apache).
--with-apxs2[=FILE]: Build shared Apache 2.0 module. FILE is the optional pathname to the Apache apxs tool; defaults to apxs.
--with-caudium=DIR: Build PHP as a Pike module for use with Caudium. DIR is the Caudium server dir, with the default value /usr/local/caudium/server.
--disable-cli: Available with PHP 4.3.0. Disable building the CLI version of PHP (this forces --without-pear). More information is available in the section about Using PHP from the command line.
--enable-embed[=TYPE]: Enable building of the embedded SAPI library. TYPE is either shared or static, which defaults to shared. Available with PHP 4.3.0.
--with-fhttpd[=DIR]: Build fhttpd module. DIR is the fhttpd sources directory, defaults to /usr/local/src/fhttpd. No longer available as of PHP 4.3.0.
--with-isapi=DIR: Build PHP as an ISAPI module for use with Zeus.
--with-nsapi=DIR: Specify path to the installed Netscape/iPlanet/SunONE Webserver.
--with-phttpd=DIR: No information yet.
--with-pi3web=DIR: Build PHP as a module for use with Pi3Web.
--with-roxen=DIR: Build PHP as a Pike module. DIR is the base Roxen directory, normally /usr/local/roxen/server.
--enable-roxen-zts: Build the Roxen module using Zend Thread Safety.
--with-servlet[=DIR]: Include servlet support. DIR is the base install directory for the JSDK. This SAPI requires the java extension must be built as a shared dl.
--with-thttpd=SRCDIR: Build PHP as thttpd module.
--with-tux=MODULEDIR: Build PHP as a TUX module (Linux only).
--with-webjames=SRCDIR: Build PHP as a WebJames module (RISC OS only)
--disable-cgi: Disable building CGI version of PHP. Available with PHP 4.3.0.
--enable-force-cgi-redirect: Enable the security check for internal server redirects. You should use this if you are running the CGI version with Apache.
--enable-discard-path: If this is enabled, the PHP CGI binary can safely be placed outside of the web tree and people will not be able to circumvent .htaccess security.
--with-fastcgi: Build PHP as FastCGI application. No longer available as of PHP 4.3.0, instead you should use --enable-fastcgi.
--enable-fastcgi: If this is enabled, the CGI module will be built with support for FastCGI also. Available since PHP 4.3.0
--disable-path-info-check: If this is disabled, paths such as /info.php/test?a=b will fail to work. Available since PHP 4.3.0. For more information see the Apache Manual.

Prev	Home	Next
Reporting Errors	Up	List of core `php.ini` directives

Web Hosting Showcase View the web hosting showcase to find more relevant web hosting choice that will guide you in selecting a good web hosting company.
	Cheap Web Hosting	ASP & ASP.Net Hosting	Dedicated Servers
	Windows 2000 & 2003 Server Hosting	Ecommerce Hosting	PHP Hosting
	Linux & Unix Hosting	Cold Fusion Hosting	South America
	Europe	Reseller Hosting	Managed Hosting
	Virtual Private Server	Asia Pacific

Web Hosting and Development Tools

Network Tools Download Template Programming Manuals Developer Tools

	Speed Test Top 25 Hosts Hosting Reviews 100 Hosts
Dedicated servers & web hosting directory

Dedicated servers & web hosting directory

Dedicated Server